Induction Soldering Steel Cover With High Frequency Heating Units
Objective Soldering a nickel plated steel cover onto a nickel plated steel EMI filter housing without damaging the RF circuit
Material 2” x 2” (50.8mm) nickel plated steel cover, 2” x 2” (50.8mm) nickel plated steel box and lead-free solder and flux
Temperature 573 ºF (300 ºC)
Frequency 229 kHz
Equipment • DW-UHF-3 kW induction heating system, equipped with a remote workhead containing two 1.2μF capacitors for a total of 2.4μF
- Una bobina di riscaldamento a induzione progettata e sviluppata appositamente per questa applicazione.
Process A single turn square helical coil is used to solder the cover to the filter box. Solder flux is applied to the filter box and two solder turns (preforms) are placed covering the perimeter of the cover. The assembly is positioned under the coil and power is applied for 7 seconds to solder the seam.
Risultati/Benefici Il riscaldamento a induzione fornisce:
- Riscaldamento a mani libere che non richiede alcuna abilità da parte dell'operatore per la produzione
• Repeatable, non-contact clean heating
• Fast precise heating
• Good solder flow without over heating the box and damaging RF circuits.
- Distribuzione uniforme del riscaldamento
