인덕션 예열 알루미늄 플랜지

설명

인덕션 예열 알루미늄 플랜지

목표: Induction Heating aluminum assembly for a preheat application.
재료 : Aluminum flanges (2.35” by 4.83” / 60 mm by 133 mm) and (3.35” by 6.91 / 85 mm by 176 mm)
Aluminum tubes (.63” / 16 mm OD) and (.92” / 23mm OD)

온도: 600ºF / 315ºC
빈도: 150 kHz

유도 가열 장비

-DW-UHF-20kW 유도 가열 시스템, equipped with a remote workhead containing two 1.5μF capacitors for a total of .75 μF
- An 유도 가열 코일 이 애플리케이션을 위해 특별히 설계 및 개발되었습니다.

인덕션 가열 프로세스:

A helical coil is used around the smaller parts, which are held in a vise while the flange is inserted into the coil. The small parts are heated in 20 seconds and reach the desired temperature at the joint area.
A larger helical coil is made to heat a larger aluminum assembly, which requires the same desired temperature. The
coil heats the larger assembly with the same power supply configuration, but requires more energy. This assembly is
heated for 20 seconds and reaches the desired temperature.

내러티브

Two helical coils are positioned under the outer rim of each part. This will be needed to soak heat into the interior of the two parts.

결과/혜택 유도 가열이 제공하는 이점:
-Higher quality end product vs. using an open flame convection furnace. Ovens are sensitive to ambient temperature and humidity variations and tend to produce uneven results
– Even distribution of heating
– Quick, clean precision heat for fast cycle times