2kg gold melting furnace, jewelry electric melting furnace, gold casting machinery, goldsmith tool,melting small Aluminum, Copper, Gold, Lead, Silver, Sterling Silver, Tin & Zinc
1. 2 kg gold melting furnace: vertical furnace is specially designed and constructed for melting metals for casting and alloying of metal up to 1100oC.
2. 40 minutes for 2kg gold,
3. Overall dimension::20*20*40mm,
1. High purity fiber alumina chamber for energy saving - chamber size: 60 mm dia. x 150 mm deep.
2. Precise temperature control, easy to read digital display and LED on/off indicator light.
3. Single point temperature control (Temperature only, no control for heating and cooling rate and dwell).
4. Complete accessories are included for immediate use,
5. One heavy duty graphite crucible with 2KG capacity.
1 x Electric Melting Furnaces
1 x Graphite Crucible
1 x Instruction manual
1 x Plier
Maximum temperature 220V= 2000 F (1100 C) 110V=1030 C
melting metal : Aluminum, Copper, Gold, Lead, Silver, Sterling Silver, Tin & Zinc
Molten gold machine instruction:
1.will melt gold machine put smoothly
2.and carefully examine whether products,then will cover intact,dissolve gold open check whether the vessel intact
3.connecting swith power supplu,electrictity,light switch
4.and the normal work,intelligent temperature controller with the digital furnace temperature and slowly rising,if there are any complicatios,be sure to stop using it
5.in the process of operation,the furnace temperaturedegrees will spread,staff shall not move and collision,avoid scald and damage
6. in june,when the temperature reached gold and gold rains melring point,staff according to demand will continue to increase.when the maximum temperature reached 1,100 degrees in 28C,will stop work or in cooling condition
7. gold,be sure to disconnect the power supply,then use to operate,go profssional pliers to ensure their safety
8. and shall immediately take gold after moving machines,owing to the high temperature,can easily damaged internal components,and burns itself to its cooling,10-20 minutes,to ensure the service life of the products
9. every time interval must be in 30-60 minutes,very easy to damage the product
10. for precision machine,plz dont remove the professional technology,to ensure accuracy
11. plz pay attention to safety and maintain normal use of machine