Medium Frequency Induction Hot Forming Heater Power-DW-MF-35

  • Medium Frequency Induction Hot Forming Heater Power-DW-MF-35

medium frequency induction hot forming heater power generator

 Main Feature:

1.Big power, low frequency and good diathermancy.

2.High frequency, low power consumption, easy installation and simple operation.

3.It can continuously work for 24 hours for the comprehensive full load design.

4.It adopts the IGBT inverter circuit in parallel connection, which ha high load adaptability.

5.It has functions as over-voltage, over-current, over-heat, phase loss and water shortage alarm indications as automatic control and protection.

6.Compared with other heating models, it can significantly promote the economic benefits, improve the quality of heated work pieces, save the energy and material, alleviate labor intensity and improve the production environment. 

Main application:
>Medium frequency machines are usually used in the penetration heating occations, for example, 
>rod heating for forging 
>rod end heating 
>melting of almost all kinds of metals 
>heating of stators or rotors for fitting 
>heating of tube end for extrusion 
>heating of moulds 
>deep quenching of shafts and gears 
>tempering or preheating of weld joint and so on .

Technical Parameters:

Model

DW-MF-35KW

Input power desire

3 phase,380V±10%, 50/60HZ

Oscillate power max

35KW

Max input current

51A

Oscillate frequency

1-20KHz

Cooling water desire

>0.2MPa  6L/Min

Duty cycle

100% ,40°C

Dimensions

Generator

560*270*470mm

Transformer

550*300*420mm

Net weight

42kg/50kg

Cable length

2-6(Meters)

 

Spare Parts For DW-MF-35KW

Item

Name of machine or parts

Specification

Amount

1

DW-MF-35KW Generator

-

1 pc

2

DW-MF-35KW transformer

-

1 pc

3

Foot switch

-

1 pc

4

Induction Coils

-

2 sets

5

Coil connect pole

-

2 set

6

Instruction Manual

-

1

7

Packing list and receipt

-

1

8

Guarantee card

-

1

9

Products certificate

-

1

Medium Frequency induction heating power supply